We ship our soapstone nationwide Go


Do it Yourself Soapstone projects

Soapstone Wood Stoves & Masonry Heaters

 

Soapstone Wood Stoves by M Teixeira Soapstone

Soapstone Wood Stoves & Masonry Heaters:

A Soapstone wood stove/masonry heater is unlike any other conventional wood burning stove. Our heaters provide comfortable, long lasting radiant heat. They have been used to heat homes in Northern Europe and Scandinavia for centuries. M. Teixeira Soapstone is now offering these soapstone masonry heaters in America.

Unlike standard wood burning stoves, a soapstone heater uses the soapstone mass to store the heat, and slowly radiates it over a period of time. The heat released by the soapstone, very much feels like the heat from the sun when you sit in a sunroom. This type of heat is a lot more comfortable than the heat created by standard wood stoves, which heat by convection , like your baseboard and radiator heaters do, creating an intense uncomfortable, short lived heat which gives you dry skin, dry nose, etc.

The soapstone wood stove/masonry heater, works like your cell phone battery: When you are burning wood for 2 to 3 hours, it's like when your cell phone is plugged in the charger. Then you stop burning wood, but the soapstone will  continue to radiate heat for hours , like when you unplug your cell phone and continue to use it all day long. 

This is achieved by the efficient way in which wood is

burned and used. The soapstone heater is a contraflow heater, which is designed with inner channels that guide the burnt gases , circulating it up and down the inner channels and by doing this, all stones absorb that energy/heat, before releasing out the chimney. In standard wood stoves, all that energy goes straight up the chimney, and for the most part wasted.

NEW: Special Price : $4995.00

Sinatra "Junior" Soapstone Wood Stove/Masonry Heaters:

For decades, this wonderful and very efficient product has been offered in the US, but the cost has made it prohibitive to most folks. After working with this product for over a decade we were able to design a very economical heater, by slashing margins and using standard slab sizes for construction.

Your chance now to own a real soapstone  contraflow heater(not a Hybrid)at a price you can now afford.

Please call us for more information  1-877-478-8170

 

Dimensions: 52 " x 39 1/2" x 26 1/2"
Weight: 2600lbs
Firebox: 16" x 12" x 18"
Log Length: 20"
Daily Wood Burn: 30lbs
Burning Time: 3 to 4 hours for heat output of 12 hours
Stored Energy: 54KWh/184,302 BTU
Efficiency: 90%
Ash Pan: Yes
Flue Exit & Diameter: 6" Rear Venting( optional rear or sides
must specify before ordering if side venting is needed)
Clearances: side & rear 4"

 

Other Models Available: Please visit our other web site, soapstone-woodstove.com

for more detailed information on soapstone wood stoves, masonry heaters and fireplaces

Sinatra X

   

$9595.00 + shipping and installation
Dimensions: 63 1/4" x 40 1/2" x 21"
Weight: 4200lbs
Firebox: 16" x 12" x 18"
Log Length: 20"
Daily Wood Burn: 50lbs
Burning Time: 3 to 4 hours for heat output of 12 to 16 hours
Stored Energy: 87(KWh)/296,931 BTU
Efficiency: 90%
Ash Pan: Yes
Flue Exit: 6" Rear vented(Side venting optional)
Clearances: side & rear 4"

 

Sinatra "Cucina" Bakeoven

 

 

$12,195.00 + shipping and installation
Dimensions: 75 1/2" x 44" x 35"
Weight: 6000lbs
Firebox: 16" x 12" x 18"
Log Length: 20"
Daily Wood Burn: 70lbs
Burning Time: 3 to 4 hours for heat output of 12 to 16 hours
Stored Energy: 124(KWh)/423,212 BTU
Bakeoven Temperature:  350 - 375 F
Efficiency: 90%
Ash Pan: Yes
Flue Exit, length & diameter: 6" Rear vented (Side venting optional)
Clearances: side & rear 4"

 

Corner Models  & Other Custom Designs :                 

        

                      

 

  Diamond

 

Dimensions 64" x 38"
Weight 4300lbs
Area Heated 1100 to 1400 sq.ft.
Firebox 16" x 12" x 18"
Log Length 20"
Daily Wood Burn: 70lbs
Burning Time: 3 to 4 hours for heat output of 12 to 16 hours
Stored Energy: 87(KWh)/296,931 BTU Efficiency : 90%
Ash Pan Yes
Flue  Exit, length & diameter

6" or 7",

optional rear or sides

(must specify before ordering if side exit is needed)

Maximum 7ft horizontal run. Minimum 16ft chimney lenght

 

 We are able to custom design a wood stove/masonry heater based on your specifications.

For more information and to see our other models of masonry heaters available please visit our Soapstone Wood Stove and Masonry Heater web site at

www.soapstone-woodstoves.com Go to Soapstone Wood Stove

Member

Interested in the beauty of natural soapstone for your Do-it-Yourself (DIY) fireplace project? Ask about our Custom Soapstone Fireplace solutions info@soapstones.com