Soapstone is naturally a softer stone, since it is made up mostly by Talc, among other minerals. What makes soapstone softer or harder, is basically how much Talc is in it.

Average architectural grade soapstone , used for countertops, wood burning stoves , sinks, tiles, etc. will have around 50% of Talc, the harder ones, perhaps only 30%. Soapstone that is used for carvings, and the art industry will usually have around 80% of Talc.

Some of these really hard stones out there, have no Talc in them and in petrological terms cannot be called a soapstone, they are serpentinites. A serpentinite is what soapstone used to be, a metamorphism of serpentinite became soapstone. Basically if a “soapstone” is so hard that it cannot be scratched by a knife, chances are it is not soapstone, it is a serpentinite. What does that mean? Well as an example, one cannot use serpentinite in an application to deal with extreme heat, because it does not have the thermal properties that soapstone does. In a kitchen environment, serpentinite will probably work just fine.

I have heard terms like “the new generation” of soapstone being harder, which I get a kick out of. In geological terms, these serpentinites are actually the “old generation”, since the harder serpentintite metamorphised into soapstone, which is softer.

About the Moh’s Hardness Scale

Although the Moh’s scale was created with and classified using 10 basic minerals, not rocks or stones (which are not minerals) it actually can be used as a guideline to determine hardness of all materials, including stones.

To determine where any material (not only stones or minerals) falls on the Moh’s scale of hardness, we would need to see if it gets scratched by a mineral listed on the Moh’s scale(or another material that hardness has been pre determined). As an example, a fingernail cannot scratch Calcite(3) but it will scratch Gypsum(2), so it is considered that a fingernail is 2.5 or so on the Moh’s scale of hardness.

With that being said, if we take something that we already know it’s hardness and try to scratch a soapstone, and it does, we will know that the soapstone is at least softer than what scratched it. So if a fingernail scratches it, it can be assumed that, that soapstone is a 2.5 or less on the Moh’s scale of hardness.

If knowing the Moh’s value of a giving material is important to you, you can actually figure this out by yourself by trying to scratch it with the following materials of already known hardness:

fingernail = 2.5
a copper penny = 3.5
knife blade = 5.5 (Anything harder than this, is definitly a serpentinite and not a soapstone).

About Scratching Soapstone

What happens if you get your soapstone scratched? While most scratches will occur if one purposely tries to scratch their stone, if you get a scratch, the beauty of soapstone is that you can easily sand it off, with a regular sandpaper or even just a dab of mineral oil or soapstone wax will hide it.

Thanks for reading,

Rogerio M. Teixeira

For an estimate, please contact us.
Toll free: (877) 478-8170
f: (201) 525-0069
email: info@soapstones.com

Soapstone International
Phones: 877-732-2180
760-294-4897
Fax:760-317-5248
info@soapstoneintl.com
www.soapstoneintl.com

Creative Soapstone
www.creativesoapstone.com
p: (941) 979-9480
f: (941) 979-9481

Offering custom soapstone installations, DIY soapstone slab sales, sinks and wood burning stoves throughout Colorado. Conveniently located in Denver.
M. Teixeira Soapstone IV
785 South Jason Street
Denver, Colorado 80223
p: (720) 570-0467
f: (303) 722-2693
email: Denver@soapstones.com

Visit our Denver, Colorado soapstone sinks, countertops, slabs, tiles and wood stove sales page.

M. Teixeira Soapstone II
725 18th Street
San Francisco, California 94107
p: (415) 401-7778
f: (415) 401-7700
email: California@soapstones.com

Our San Francisco, California location has the Largest Soapstone Stock and Variety on the West Coast, second in the country only to our soapstone warehouse in Hackensack, New Jersey!

M Teixeira Soapstone offers custom installations and soapstone slab sales in San Francisco, Sacramento, Santa Rosa, San Jose, Monterey and all surrounding areas. Client’s are welcome to choose their own soapstone slabs in our Potrero Hill warehouse in the heart of our Design Center. Looking for Soapstone in California visit any one of our locations.

To ensure the highest level of service, we recommend making an appointment for showroom visits.

Visit our San Francisco soapstone sinks, countertops, slabs, tiles and wood stove sales page.

M. Teixeira Soapstone III
6010 McDaniel Lane, Unit B
Charlotte, North Carolina 28213
p: (704) 921-7773
Fax: (704) 921-7813
email: Charlotte@soapstones.com

Showroom and Soapstone Slab Warehouse visits by appointment. Call us to see our wide selection of soapstone slabs, sinks, tiles & more! Custom fabrication and installation provided in North Carolina (NC), South Carolina (SC), Tennesse (TN) and Georiga (GA).

Visit our North Carolina soapstone sinks, countertops, slabs, tiles and wood stove sales page..